Broken clip prevents visor staying open

Nothing can be more frustrating when driving into the sun and the extension part of your visor keeps dropping loose.
Whilst it's relatively easy to remove the complete visor from the car, it is even easier to remove the visor and clip without disturbing the mounting.

Rather than having to purchase a whole new visor, you should be able to get an old visor, and hence clip plate from a local scrap yard.

	You can see the broken clip on the bottom left. This was enough to cause the extension flap to come loose and drop down.
	Gently inserting a thin bladed knife centrally from the right to go under the clip plate, and leavering up, is enough the release the plate.
	.............and remove the assembly from the car. Note the normal position of the spring.
	This shows the four clips that hold the assembly in place on the main part of the visor.
	Viewed from the other side.
	To release the clip from the extension section, ease the clip plate off the pin at the opposite end to the spring.

Once you have replaced the clip plate, simply present the assembly to the main part of the visor and gently press it home.